鉄骨工場建設見積書 | 鉄骨工場建設見積書や2023年の工場建設は企業の持ち主がよく調べているキーワードです。最新テクノロジーにより、工場の建設が様々な材料で非常に簡単となり、工期とコストも抑えられます。

弊社、GECテクノロジー開発株式会社が顧客様に欧米テクノロジーによる2023年の建設テクノロジーを提供致します。現在のシステム建築と違い、最新の欧米テクノロジーを導入されている鉄骨構造、鉄筋コンクリート構造、コンクリート充填鋼管構造を利用し、顧客様に品質、低コスト、丈夫な工場をお持ちいたします。

鉄骨工場建設見積書

弊社はGUBEMとういう柱と桁システムを利用しています。これはコンクリート充填鋼管構造の柱と桁システムです。全部の鋼管は弊社工場に作られ、設計図通りに組み立てとコンクリートを積むということです。

本テクノロジーで工場も丈夫で、普通の鉄鋼立て方法と比べ、低コストに抑えられます。伝統の鉄筋コンクリート造鉄鋼柱、桁と比べ、工期が早く、低価格という利点があります。

価格競争のため、今システム建築を製造している一部の会社が工場建設コストを低下するように、下記の通りな方法をしています。

+ 材料の品質と原産地が曖昧である。

+ 設計図に風や台風などの天災を設計していない。鉄鋼構造の重量を減らし、投資金額を制限する目的です。これは不公平な競争で、投資家に悪影響を与えられます。

+設計図に標準な細長比とたわみを計算されていないため、工場が揺れ、大きな歪み、または崩壊可能性があります。このような方法も価格を制限する目的も、投資家の使用中に悪影響を与えられます。

弊社、GECテクノロジー開発株式会社はベトナムの建設標準に基づい、テクノロジーと建設材料の開発や思考方法の改善などを利用し、低価格を制限することで、投資家が安心し、長く使っていただきたいことです。

欧米テクノロジーによる2023年の建設技術の利点

本最新テクノロジーは普通の建設テクノロジーと大違いで、顧客様に非常に多くの利点がもたらします。以下の特性のいくつかに述べます。

普通の施工方法と比べて、約15％～20％のコストを節約

施行時間が短縮できる

コンクリート充填鋼管構造でもっと丈夫

高さと階数の制限がない

新材料で環境にやさしい

欧米テクノロジーによる2023年の建設テクノロジー見積書

Vậy Phương pháp xây dựng nhà xưởng khung kết cấu thép, bê tông.cốt thép này của chúng tôi giá bao nhiêu?, dưới đây, Công nghệ GEC xin gửi tới quý khách bảng chi phí để quý khách có thể tham khảo :

さて、弊社のコンクリート充填鋼管構造の建設方法はいくらでしょうか、下記の通り、GECテクノロジー開発株式会社が見積書を記載致します。

留意点

小工場、駐車場、食堂などの簡単な工事の見積書です。

幅20メートル以上の工場の見積書です。

追加価値税の10パーセントがまだ計算されていない。

時期により、変更する場合があります。

工場建設見積書

鉄鋼柱・梁：000Đ – 600.000ベトナムドン/1㎡

建設単価：000Đ – 500.000ベトナムドン/1㎡

連携鉄鋼柱・梁と鉄筋コンクリート：000Đ – 500.000ベトナムドン/1㎡

建設：000Đ – 400.000ベトナムドン/1㎡

PRICE LIST OF 2023 FACTORY CONSTRUCTION WITH EUROPEAN TECHNOLOGY

So how much does it cost to build a steel and concrete frame factory? Please refer to our table of costs below:

NOTE:

The unit price applied to simple worsk including small workshop, garages, canteen,…

unit price applicable to construction of factory aperture > 20M.

The unit price is 10% VAT excluded.

The reference price is subject to change from time to time.

Unit price of factory construction:

Steel truss frame: VND 000 – VND 600,000 / m².

Construction unit price: VND 000 – VND 500,000 / m².

Steel frame – combined reinforced concrete: VND 000 – VND 500,000 / m².

Construction: VND 000 – 400,000 /m².

Gec – a reputable factory construction company

Dear our customers, GEC technology development investment joint stock company is a prestigious and professional company in the field of housing construction, residential houses and factories. We are always at the forefront of applying new technologies and practices to bring the best value with the lowest cost to our customers.

Currently, we are implementing the construction of factories in all northern and central provinces with European technology. We will provide you with a design based on your needs, ensuring the optimal of each area such as the factory, resting room, cafeteria or office.

With the trend of European technology factory building, it will help our business to expand production spaces, with low investment costs and quick construction.

Please contact us: Call 0979.781.007 now

Support to complete procedures, license, construction process

Gec Technology Development Investment Joint Stock Company

CEO TA QUANG HUY

Address: BT 5.7, Functional Area of Tay Mo Urban Area, Nam Tu Liem District, Hanoi City

Mobie: 0979.781.007 ; Tel: 02436.68.68.30

Email: gecvietnam @ gmail | Trang web: http://gec.com.vn | Facebook: https://www.facebook.com/dautuphattriencongnghegec/

————————————————————————————————-

Unit Price of Factory Construction Steel Frame Factory

Unit Price of Factory Construction Steel Frame Factory, Unit price of steelwork factory construction. 2023 factory construction are among the key words searched by many business owners. Current modern technology today makes a factory construction more and more easy with many different materials, at the same time enables cost saving and minimizes construction time.

GEC Technology Development Investment Joint Stock Company would like to introduce a new European factory construction technology for 2023. Different from the traditional construction of pre-engineered steel frame factory. we use entirely new technology from Europe with steel structure. reinforced concrete structure – armored steel that brings works of quality, cost and time saving as well as durability.

Unit Price of Factory Construction Steel Frame Factory

The GUBEAM girder frame system will be used, this is an armored reinforced concrete beam frame system. The entire reinforcement is fabricated at the workshop then be installed in locations according to the design and pour concrete in place.

With this modern technology, the workshop will be more stable. and especially the cost is reduced significantly compared to other traditional methods of erecting steel columns. The system of steel columns + steel truss currently in use has the advantage of fast construction, lower cost compared to the traditional column frame system, reinforced concrete beams…

However, in order to compete on the cost based on investment rate. There are a number of suppliers of pre-engineered steel structures on the market currently follow these ways to lower the cost per square meter of investment in factory construction:

+ Supply materials of improper quality and origin.

+ Design calculations do not satisfy requirement for bearing capacity for unfavorable conditions such as wind, storm … Their main purpose is to reduce the volume of steel structures in the project so that the investment cost decreases accordingly. This could be considered as unfair competition which threatens the benefit of the owner.

+ The design is not able to secure slenderness and displacement according to the standards. Causing the factory to shake, deform or collapse. The purpose. This unfair reduction is also harmful to the owner during use ..

Therefore, the principle of GEC Technology Development Investment JSC is to reduce the cost based on our research and development of construction technology such as construction materials. Measures and construction solutions to meet construction standards set by the state to ensure current and long-term use value for the owner.

ADVANTAGES OF FACTORY CONSTRUCTION WITH 2023 EUROPEAN TECHNOLOGY

This completely new factory construction technology helps you to bring many advantages and convenience that traditional factory construction can hardly meet.

Some of those are listed as follows:

THE COST IS 15-20% CHEAPER THAN THE TRADITIONAL METHOD.

THE CONSTRUCTION TIME IS FASTER.

MORE STABLE WITH A CONCRETE COLUMN FRAME, STEEL ARMORED COLUMN AND STEEL RAFTERS.

THE NUMBER OF HEIGHT AND FLOORS ARE NOT RESTRICTED.

NEW MATERIAL, ENVIRONMENT FRIENDLY.

PRICE LIST OF 2023 FACTORY CONSTRUCTION WITH EUROPEAN TECHNOLOGY

So how much does it cost to build a steel and concrete frame factory? Please refer to our table of costs below:

NOTE:

The unit price applied to simple worsk including small workshop, garages, canteen,…

unit price applicable to construction of factory aperture > 20M.

The unit price is 10% VAT excluded.

The reference price is subject to change from time to time.

Unit price of factory construction:

Steel truss frame: VND 600,000 – VND 720,000 / m².

Construction unit price: VND 480,000 – VND 600,000 / m².

Steel frame – combined reinforced concrete: VND 480,000 – VND 600,000 / m².

Construction: VND 360,000 – 480,000 /m².

Gec – a reputable factory construction company

With the trend of European technology factory building, it will help our business to expand production spaces, with low investment costs and quick construction.

Gec – a reputable factory construction company

With the trend of European technology factory building, it will help our business to expand production spaces, with low investment costs and quick construction.

Please contact us: Call 0979.781.007 now

Support to complete procedures, license, construction process

Gec Technology Development Investment Joint Stock Company

CEO TA QUANG HUY

Address: BT 5.7, Functional Area of Tay Mo Urban Area, Nam Tu Liem District, Hanoi City

Mobie: 0979.781.007 ; Tel: 02436.68.68.30

Email: gecvietnam @ gmail | Trang web: http://gec.com.vn | Facebook: https://www.facebook.com/dautuphattriencongnghegec/

鉄骨工場建設見積書 | 鉄骨工場建設見積書 | 鉄骨工場建設見積書 | 鉄骨工場建設見積書 | 鉄骨工場建設見積書

Bài viết trước đó Căn hộ 61m2 nhỏ xinh

Bài viết sau đó Unit price of Steelwork factory construction

鉄骨工場建設見積書

Bài viết mới

Thông tin liên hệ

Liên kết

Bài viết liên quan