钢架工厂建设

钢架工厂建设 – 钢架工厂,2023年工厂的单价是许多企业主搜索的关键词之一。借助当今的现代技术,使用许多不同的材料来建设工厂变得相当容易,节省了成本和施工时间。

钢架工厂建设

.

GEC技术投资发展股份公司将向您介绍采用欧洲技术的2023年新工厂建设技术。与传统的预制钢框架工厂建筑不同,我们使用欧洲的全新技术,如钢结构,钢筋混凝土结构-装甲钢将为您提供优质,成本低,耐用而施工时间短的工程。

钢架工厂建设

 我们将使用GUBEAM大梁框架系统。这是装甲的钢筋混凝土框架系统, 所有这些钢筋都将在工厂加工,并将在设计的位置安装和当场浇筑混凝土。

采用这种技术,与其他传统的钢筋加固方法相比,则工厂将更加坚固,尤其是降低成本。当前使用的钢桩+钢桁架系统的优点是施工速度快,与传统的柱架系统,钢筋混凝土梁相比,成本较低。

但是,为了在基于投资的成本上竞争,市场上有许多预制钢结构的供应商目前正在采取以下方式来降低工厂建设每平方米投资的成本。 :

+供应质量和来源不当的材料。

+设计计算不能保证在遇到不利条件时的承载力(例如风,台风等)。目的是减少项目中钢结构的数量,即降低投资成本。这种情况是不正当竞争,并对所有者造成伤害.

+设计计算不能保证符合标准的细长和位移,导致工厂震动,变形或倒塌。这种做法的目的也是不正当的减少成本,并在使用过程中对投资者造成伤害。

因此,GEC技术投资发展股份公司的原则是基于建筑技术的研发的基础上例如建筑材料,施工措施和解决方案降低成本,达到国家规定的建设标准,以确保投资者的当前和长期使用价值。

欧洲技术2023年工厂建设的优势

这项全新的工厂建设技术可为您带来传统工厂建造难以满足的诸多优势和便利。可以提及以下一些特征:

与传统方法相比,价格便宜15-20%。

施工时间较快。 

钢筋混凝土,装甲钢桩框架和钢桁架更加坚固

?没有限制高度、楼层数。

 环保的新材料。

欧洲技术2023工厂建设单价

那么,我们钢框架和钢筋混凝土框架建设方法要花多少钱?下面,GEC技术投资发展股份公司向您发送价格表,以供参考:

备注

此价格适用于包括小型车间,车库,餐厅在内的简单工程事项…

此价格 适用于口度大小大于20M的工厂内建设

此价格未包含10%的增值税。

参考价格,可随时更改。

工厂建设单位

钢框架:600,000-720,000 VND / 1平方米。

建筑单价:480,000-600,000越南盾/ 1平方米

钢框架:480,000-600,000越南盾/ 1平方米。

建筑:360,000-480,000 VND / 1平方米。

.

Sân Golf.

GEC技术投资发展股份公司

谢光辉-執行長

地址: 河内市南慈廉郡西姥都市机能区BT 5.7号

Mobie: 0979.781.007 ; Tel: 02436.68.68.30

Email:  gecvietnam @ gmail  网址:  http://gec.com.vn  | Facebook:  https://www.facebook.com/dautuphattriencongnghegec/

 

Unit Price of Factory Construction Steel Frame Factory, Unit price of steelwork factory construction. 2023 factory construction are among the key words searched by many business owners. Current modern technology today makes a factory construction more and more easy with many different materials, at the same time enables cost saving and minimizes construction time.

GEC Technology Development Investment Joint Stock Company would like to introduce a new European factory construction technology for 2023. Different from the traditional construction of pre-engineered steel frame factory. we use entirely new technology from Europe with steel structure. reinforced concrete structure – armored steel that brings works of quality, cost and time saving as well as durability.

Unit Price of Factory Construction Steel Frame Factory

The GUBEAM girder frame system will be used, this is an armored reinforced concrete beam frame system. The entire reinforcement is fabricated at the workshop then be installed in locations according to the design and pour concrete in place.

With this modern technology, the workshop will be more stable. and especially the cost is reduced significantly compared to other traditional methods of erecting steel columns. The system of steel columns + steel truss currently in use has the advantage of fast construction, lower cost compared to the traditional column frame system, reinforced concrete beams…

However, in order to compete on the cost based on investment rate. There are a number of suppliers of pre-engineered steel structures on the market currently follow these ways to lower the cost per square meter of investment in factory construction:

+ Supply materials of improper quality and origin.

+ Design calculations do not satisfy requirement for bearing capacity for unfavorable conditions such as wind, storm … Their main purpose is to reduce the volume of steel structures in the project so that the investment cost decreases accordingly.  This could be considered as unfair competition which threatens the benefit of the owner.

+ The design is not able to secure slenderness and displacement according to the standards. Causing the factory to shake, deform or collapse. The purpose. This unfair reduction is also harmful to the owner during use ..

Therefore, the principle of GEC Technology Development Investment JSC is to reduce the cost based on our research and development of construction technology such as construction materials. Measures and construction solutions to meet construction standards set by the state to ensure current and long-term use value for the owner.

ADVANTAGES OF FACTORY CONSTRUCTION WITH 2023 EUROPEAN TECHNOLOGY

This completely new factory construction technology helps you to bring many advantages and convenience that traditional factory construction can hardly meet.

Some of those are listed as follows:

THE COST IS 15-20% CHEAPER THAN THE TRADITIONAL METHOD.

THE CONSTRUCTION TIME IS FASTER.

MORE STABLE WITH A CONCRETE COLUMN FRAME, STEEL ARMORED COLUMN AND STEEL RAFTERS.

THE NUMBER OF HEIGHT AND FLOORS ARE NOT RESTRICTED.

NEW MATERIAL, ENVIRONMENT FRIENDLY.

  

PRICE LIST OF 2023 FACTORY CONSTRUCTION WITH EUROPEAN TECHNOLOGY 

So how much does it cost to build a steel and concrete frame factory? Please refer to our table of costs below:

NOTE:

The unit price applied to simple worsk including small workshop, garages, canteen,…

unit price applicable to construction of factory aperture > 20M.

The unit price is 10% VAT excluded.

The reference price is subject to change from time to time.

 

Unit price of factory construction:

Steel truss frame: VND 600,000 – VND 720,000 / m2.

Construction unit price: VND 480,000 – VND 600,000 / m2.

Steel frame – combined reinforced concrete: VND 480,000 – VND 600,000 / m2.

Construction: VND 360,000 – 480,000 /m2.

 

Gec – a reputable factory construction company

Dear our customers, GEC technology development investment joint stock company is a prestigious and professional company in the field of housing construction, residential houses and factories. We are always at the forefront of applying new technologies and practices to bring the best value with the lowest cost to our customers.

Currently, we are implementing the construction of factories in all northern and central provinces with European technology. We will provide you with a design based on your needs, ensuring the optimal of each area such as the factory, resting room, cafeteria or office.

With the trend of European technology factory building, it will help our business to expand  production spaces, with low investment costs and quick construction.

 

Gec – a reputable factory construction company

Dear our customers, GEC technology development investment joint stock company is a prestigious and professional company in the field of housing construction, residential houses and factories. We are always at the forefront of applying new technologies and practices to bring the best value with the lowest cost to our customers.

Currently, we are implementing the construction of factories in all northern and central provinces with European technology. We will provide you with a design based on your needs, ensuring the optimal of each area such as the factory, resting room, cafeteria or office.

With the trend of European technology factory building, it will help our business to expand  production spaces, with low investment costs and quick construction.

Please contact us: Call 0979.781.007 now

Support to complete procedures, license, construction process

Gec Technology Development Investment Joint Stock Company

CEO TA QUANG HUY

Address: BT 5.7, Functional Area of Tay Mo Urban Area, Nam Tu Liem District, Hanoi City

Mobie: 0979.781.007 ; Tel: 02436.68.68.30

Email:  gecvietnam @ gmail  | Trang web:  http://gec.com.vn  | Facebook:  https://www.facebook.com/dautuphattriencongnghegec/

钢架工厂建设 | 钢架工厂建设 | 钢架工厂建设 | 钢架工厂建设 | 钢架工厂建设 | 钢架工厂建设

Bài viết trước đó Build a cheap house
Bài viết sau đó 钢架工厂